Connect Your Netgear WiFi Router Without WPS

Even though wireless connectivity has become essential in today’s world, setting up your network can still be difficult, especially if you’re trying to set up your Netgear WiFi router without WPS. If your device doesn’t support WPS (Wi-Fi Protected Setup) or you don’t want to utilize it due to security concerns, don’t worry. You can still have a dependable and secure internet connection if you follow a manual setup process.

In this post, we’ll take you through setting up your Netgear router without WPS so you can connect your devices and optimize network performance.

Why go with a Netgear WiFi router that doesn’t have WPS?

To make Wi-Fi network connections easier, WPS was developed. Users may easily link their devices with the router by pressing a button or entering a brief PIN. WPS is less secure than alternative techniques, nevertheless, due to documented weaknesses. In favor of more robust security protocols like WPA2 or WPA,3 many contemporary users and network administrators decide to completely disable WPS.

You can still easily get everything up and running even if your network or devices don’t support WPS or you’ve turned it off for safety.

How to Set Up Netgear Wi-Fi without: A Comprehensive Guide

Let’s walk you through setting up Netgear Wi-Fi without WPS. Using a browser, this technique entails manually accessing the router setup page.

Turn on your router after unpacking it.

Prior to changing the settings, start with the basics:

• Attach your Netgear router to a power source.
• Connect it to your modem using the provided Ethernet cable (modem LAN port to router WAN port).
• Before turning on the router, wait for the lights to stabilize.

To connect, use Ethernet or the router’s integrated Wi-Fi.

You will need to manually connect to the router because we are not using WPS:

• Option A: Use an Ethernet wire to directly connect your PC to a LAN port on the router.
• Option B: Create a wireless connection using the router’s default SSID and password.

You can configure your network after connecting.

Go to the page for router configuration.

To access the Admin Panel, use any web browser on the connected device and type the following in the address bar: 

• The website http www routerlogin net
• When you hit Enter, the router’s login screen will appear.
• Try using the default IP address 192.168.1.1 or 192.168.0.1 if that doesn’t work.

Access the Admin Panel.

You will be obliged to offer your keyword and username.

Typically, the default login credentials are:

• Login name: admin
• The password is password

(Resetting the router to factory settings could be necessary if you’ve altered these before and forgotten.)

Configure Your Wireless System

After logging in:

• Go to the Wireless Settings section. Contingent on the type of your router, this may be under “Basic” or “Setup.”
• Turn off WPS if it’s turned on.
• Any alternative to the default network name (SSID) can be used.
• To make a secure password, use WPA2 or WPA3 encryption.
• Save your settings.
• This is an important step. By manually setting up a safe and dependable wifi environment, you may do away with the need for WPS.

Manually Connect Your Devices

Your network is now prepared:

• Go to each device’s Wi-Fi settings (phone, laptop, tablet, etc.).
• Locate the newly created network name (SSID).
• Enter the password you generated after choosing it.
• It should be possible for you to connect your gadgets to the internet.
• This completes the manual connection process for your Netgear router without WPS.

Troubleshooting Advice

• Not able to establish a connection? Try restarting your network and modem. 
• Is the login page not loading? Try a diverse browser or remove the cache in your existing one.
• Have you lost your admin login credentials? Holding down the reset switch on the back of the router for 10 seconds will return it to factory settings.

The Benefits of Setting Up a Netgear Wireless Router Without WPS

You may reduce security concerns and enhance network control by setting up your Netgear router without WPS. You may want to stay away from WPS entirely for the following reasons: 

• Enhanced Security: Known WPS attacks are avoided by manual setting.
• Complete Customization: Every aspect of your wireless configuration is within your control.
• Compatibility: Wider compatibility is ensured by manual configuration; older or less costly devices could not support WPS.

Final Thoughts

WPS was created to make things easier, however for contemporary wireless networks, manual settings are preferable. By setting up your Netgear WiFi router without WPS, you can improve network security and have greater control over how devices connect and interact.

Whether you’re a new user or are just reconfiguring your network, this article gives you all the tools you need to safely and successfully connect your Netgear router without WPS. 

FAQs

1. Can I still use my Netgear router if my device doesn’t support WPS?

Yes, you may manually connect your device by entering the network SSID and password. Use a browser to view the router’s settings in order to create a secure connection without WPS.

      2. How can I disable the WPS on my Netgear router?

After going into the router at http://www.routerlogin.net and choosing Wireless Settings, find the WPS option. To strengthen network security and prevent unauthorized access, you may then turn it off.

     3. What is the default login for the Netgear router?

Generally, the default password is “password,” and the default username is “admin.” If none of this works, the router could need to be factory reset to revert to its original settings, or your login credentials might have been changed.

   4. Is connecting a Netgear WiFi router without WPS safer?

WPS is not as secure as manually setting Wi-Fi with WPA2 or WPA3 encryption. WPS vulnerabilities may make it simpler for unauthorized devices to access your network.